Sign In | Join Free | My pysqlite.org
pysqlite.org
Huisins New Material Technology Co., Limited
Huisins New Material Technology Co., Limited Innovation and Environmental protective links us together
Home > Industrial Spray Paint >

High Build Epoxy Intermediate Coating Suitable For Application At Low Temperature

Huisins New Material Technology Co., Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Huisins New Material Technology Co., Limited
City: Guangzhou
Province/State: Guangdong
Country/Region: China
Tel: 86-20-38993165
Contact Person:
Ms Lily

High Build Epoxy Intermediate Coating Suitable For Application At Low Temperature

Brand Name : Huisins
Model Number : 725-H53-87
Certification : SGS,UL ROHS.CE
Place of Origin : China
MOQ : 5000
Price : negotiated
Payment Terms : T/T
Supply Ability : 300000pcs/month
Packaging Details : Part A 22kg/13.5L in 20L container Part B 6.5kg/6.5L in 9.25 L container
Typical Film Thickness : 200 microns dry (250microns wet)
Main Raw Material : epoxy
Color : Grey/White
Volume Solids : 80%±2%
Contact Now

High Build Epoxy Intermediate Coating Suitable For Application At Low Temperature


Product Description


-A two pack high build epoxy coating.
-Suitable for application at low temperature.
-VOC less than 200g/L

Intended Uses

-For use in atmospheric environment protection
-For use at offshore facility, chemical plant, and wind power tower, etc.

Product Information

Volume Solids80%±2%
Finish/SheenGloss
Typical Film Thickness200 microns dry (250microns wet)
Theoretical Coverage4m2/L at typical film thickness
Mix Ratio2:1(volume)3.4:1(mass)
Method of Application
Airless SprayRecommended
Tip size range

0.38-0.53mm


Output pressure≥17MPa
Air SprayTip size range2.0-3.0mm
Output pressure≥0.4MPa
Brush/RollerFor small area only
ThinnerNot recommended. Use only in exceptional circumstances (volume 5%)
CleanerHX-501
Drying Information
-5℃10℃25℃35℃
Touch Dry6h2h1h0.5h
Hard Dry48h24h18h12h
Pot Life6h4h3h2h
Overcoating Data Substrate Temperature
Overcoated by-5℃10℃25℃35℃
Min MaxMin MaxMin MaxMin Max
725-J43-548h24h18h12h
725-BS43-9148h24h18h12h
725-H42-3048h24h18h12h
StorageStore in cool and dry conditions. Well ventilate. Keep away from hot and fire. Shelf Life: 12 months minimum at 25℃. Subject to re-inspection thereafter
Pack SizePart A22kg/13.5L in 20L container
Part B6.5kg/6.5L in 9.25 L container
Flash PointPart AGreater than 31℃
Part BGreater than 28℃
Mixed paintGreater than 31℃

Surface Preparation


All surfaces to be coated should be clean, dry and free from contamination.


Primed Surfaces


The primer surface should be dry free from all contamination and 725-H53-87 must be applied within the overcoating intervals specified (consult the relevant product data sheet).


Areas of breakdown, damage etc., should be prepared to the specified standard (e.gSa2½(GB/T 8923.1-2011)or Abrasive Blasting, or Power Tool Cleaning) and patch primed prior to the application of 725-H53-87.


Metallic Zinc Primed Surfaces


Ensure that surface of the primer is clean, dry and free from contamination and zinc salts before application of 725-H53-87. Ensure zinc primers are fully cured before overcoating.


Limitations


This product will not cure adequately below -10℃. For maximum performance ambient curing temperature should be above -5℃.


In common with all epoxy base coatings, 725-H53-87 will exhibit chalking of the firm on UV exposure.


Apply in good weather. Temperature of the surface to be coated must be least 3℃ above the dew point when the humidity is lower than 85%.


The dry time and overcoating interval may change according to the environment factors.


Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.


Duty statement

The data in the sheet base on the information from the laboratory and practice. The application may exceed the control, so we only ensure our product quality. We own the right of the data sheet modification without informing.

Product Tags:

industrial protective coatings

      

anti corrosion coatings

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

High Build Epoxy Intermediate Coating Suitable For Application At Low Temperature Images

Inquiry Cart 0
Send your message to this supplier
 
From:
Enter your email please.
To: Huisins New Material Technology Co., Limited
Subject:
Message:
Characters Remaining: (0/3000)
 

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2018 pysqlite.org. All rights reserved.