Sign In | Join Free | My pysqlite.org
pysqlite.org
Huisins New Material Technology Co., Limited
Huisins New Material Technology Co., Limited Innovation and Environmental protective links us together
Home > Industrial Spray Paint >

Micaceous Iron Oxide Epoxy Intermediate Coating Industrial Spray Paint Fast Drying

Huisins New Material Technology Co., Limited
Huisins New Material Technology Co., Limited
City: Guangzhou
Province/State: Guangdong
Country/Region: China
Tel: 86-20-38993165
Contact Person:Ms Lily

Micaceous Iron Oxide Epoxy Intermediate Coating Industrial Spray Paint Fast Drying

Brand Name : Huisins
Model Number : 725-H53-82
Certification : SGS,UL ROHS
Place of Origin : China
MOQ : 5000
Price : negotiated
Payment Terms : T/T
Supply Ability : 300000pcs/month
Packaging Details : Part A 27.2kg/16L in 20 L container Part B 3.7kg/4L in 6L container
Volume Solids : 70%±2%
Main Raw Material : Micaceous Iron Oxide Epox
Color : Grey
Typical Film Thickness : 125 microns dry (187microns wet)
Contact Now

Fast Drying Micaceous Iron Oxide Epoxy Intermediate Coating Industrial Spray Paint

Product Description
-A two pack abrasion resistant epoxy fast drying anticorrosive intermediate coating giving excellent long term anticorrosive protection.
-Suitable for application at low temperature
-VOC less than 260g/L
Intended Uses
-For use in atmospheric environment protection.
-For use at building, chemical plant, paper mill ,bridge approach, etc.


Product Information

Volume Solids70%±2%
Finish/SheenGloss
Typical Film Thickness125 microns dry (187microns wet)
Theoretical Coverage5.3m2/L at typical film thickness
Mix Ratio4:1(volume)7.4:1(mass)
Method of Application
Airless SprayRecommended
Tip size range

0.38-0.53mm

Output pressure≥17MPa
Air SprayTip size range2.0-3.0mm
Output pressure≥0.4MPa
Brush/RollerFor small area only


Thinner


Not recommended. Use only in exceptional circumstances (volume 5%)

CleanerHX-501
Induction PeriodNot necessary
Drying Information
-5℃5℃25℃35℃
Touch Dry6h2h45min30min
Hard Dry36h24h18h12h
Pot Life6h4h2.5h1.5h
Overcoating Data Substrate Temperature
Overcoated by-5℃5℃25℃35℃
Min MaxMin MaxMin MaxMin Max
725-H53-8236h24h18h12h
725-J43-536h24h18h12h
725-BS43-9172h36h20h12h
725-H42-3036h24h18h12h
StorageStore in cool and dry conditions. Well ventilate. Keep away from hot and fire. Shelf Life: 12 months minimum at 25℃. Subject to re-inspection thereafter
Pack SizePart A27.2kg/16L in 20 L container


Part B3.7kg/4L in 6L container


Flash Point

Part AGreater than 31℃
Part BGreater than 28℃
Mixed paintGreater than 31℃






















Surface Preparation

All surfaces to be coated should be clean, dry and free from contamination.


Primed Surfaces

The primer surface should be dry free from all contamination and 725-H53-82 must be applied within the overcoating intervals specified (consult the relevant product data sheet).

Areas of breakdown, damage etc., should be prepared to the specified standard (e.gSa2½(GB/T 8923.1-2011)or Abrasive Blasting, or Power Tool Cleaning) and patch primed prior to the application of 725-H53-82.


Metallic Zinc Primed Surfaces

Ensure that surface of the primer is clean, dry and free from contamination and zinc salts before application of 725-H53-82. Ensure zinc primers are fully cured before overcoating.

Repair

The areas to be repaired should be cleaned to St3(GB/T 8923.1-2011)by mechanical method or higher level of surface prepared to Sa2.5(GB/T 8923.1-2011)by abrasive blasting. Abrade the area immediately surrounding the repair to provide a key for subsequent coating application. Overlap areas should be kept to a minimum.






Limitations


For maximum performance ambient curing temperature should be above 5℃.

In common with all epoxy base coatings, 725-H53-82 will exhibit chalking of the firm on UV exposure.

Apply in good weather. Temperature of the surface to be coated must be least 3℃ above the dew point when the humidity is lower than 85%.

The dry time and overcoating interval may change according to the environment factors.

Avoiding absorb the solvent steam and paint steam for long time. Skin and eyes must avoid contacting the paint. Pay attention to ventilate and fireproof when applying.


Product Tags:

industrial protective coatings

      

industrial paint coatings

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Micaceous Iron Oxide Epoxy Intermediate Coating Industrial Spray Paint Fast Drying Images

Inquiry Cart 0
Send your message to this supplier
 
From:
Enter your email please.
To: Huisins New Material Technology Co., Limited
Subject:
Message:
Characters Remaining: (0/3000)
 

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2018 pysqlite.org. All rights reserved.